New is good. Old is better!

I would LOVE to own a $4000.00 Powermatic 10″ table saw like this one.  The quality of the
cuts would be amazing and sometimes I feel that it would be hard NOT to make perfect furniture with a tool like that.    Unfortunately, I don’t think that will ever happen.  And that’s ok, because I have a perfectly capable 1953 Craftsman table saw that was originally bought for $53.88.  No, I did not put the period in the wrong spot.  I even have the original

The original receipt for my table saw. Check out the date…10/22/53…that’s a piece of history!

receipt to prove it!  This saw, along with many of my other tools, were handed down to me from generous people who wanted to see the tools take on a second life.

Most of the tools I have acquired are what many people would consider “vintage” or “antique.”  I like that.  These tools were some of the best back in their time, without all of the bells and whistles.  Very basic, but solid.  So, why can’t they still be great tools?  Unfortunately, many of these classic tools have sat in wet basements, unused for 10,

Original magazine that came with my table saw!

20, or 30 years.  But, with a little TLC, I am trying to revive some of these old beasts to give them a second chance in creating some fine woodworking projects!   Hopefully, after seeing how easy it is to restore some of these oldies but goodies, it will inspire you to actually buy that old tool you may find at the garage sale for $5.00!

Now, for some before and after pics of a few of my favorite well broken in tools!  First up is the 1953 Craftsman table saw.  A little cleaning, polishing, and then a fresh paint job was all this little guy needed!

BEFORE – 1953 Craftsman Table Saw

AFTER – Shown with a new on/off switch mounted on the front (instead of on the back-yikes it was dangerous) and a thrown together outfeed table made from left over wood.  Yes, it already has saw dust on it!

1953 Craftsman Table Saw in my shop - restored and working like a champ!

This next tool was given to me by the gentleman who installed my furnace.  He explained to me that as a child he spent hours with his father in their wood shop building wooden Christmas decorations that they would sell for extra cash.  His father passed away years ago and all of his old woodworking tools had been sitting in his basement collecting dust and rust.  When he saw the beginnings of my wood shop, he decided that he wanted his father’s tools be put to use.   This drill stand was a lot of fun to restore (which really only involved taking it completely apart, cleaning the rust off with a wire brush and scouring pads, and then polishing it with steel wool).  The data plate shows that it is a “Mall Drill Stand” Model 28710.  I haven’t been able to find ANY information on this specific drill stand, but a little digging on the company shows that the Mall Tool Company was bought out in 1956 – so it has to date pre -1956.  I would love to find out the full history of this tool, but for now it works great and looks pretty classic too!

BEFORE – Vintage Mall Drill Stand

AFTER – Mall Drill Stand

Mall Drill Stand data plate

The drill that came mounted in the drill stand is a Shopcraft Model 9748 drill.  Nothing special – A single speed 3/8″ drill.  It works though!  Again, I haven’t been able to find much information on the drill.

Shopcraft Model 9748 drill – mounts in the drill stand

As my brother says, “I’m a firm believer in…” you fill in the blank.  I say, I’m a firm believer in NOT reinventing the wheel and not buying something brand new when you already have something that does the job.  Would I like a $3000.00 Powermatic drill press?  YES.  Can I justify spending $3000.00 on a Powermatic drill press?  Ye…well, no I guess not.  I’m content to use a 1950s era Mall Drill Stand!  New is good.  Old is even better!

Advertisements

5 thoughts on “New is good. Old is better!

  1. I just inherited my Dads table saw – Identical to this one. IN the move, one of the red brackets got loose and the others that are on the frame are loose as well. Do you have any instructions for how and where to place those red metal brackets? Dad had built a wood platform in the bottom where you have your red brackets but the top has need of the three brackets. I realize this is an old article but hope to still get an answer.
    Bob

  2. I have a Mall drill stand with a Van Dorn 5/16″ drill that works but both need a good cleaning at this time. The drill has a cordless chuck and is original to the drill. It has an after market cord, but it could be restored to original.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s